Technology

New reinforced and heavier frame

volume + 30%  - speed + 30% - acceleration +50% 

New reinforced and heavier frame - Double motor on the Y axis.

The new frame with an increase of dimensions enables the machine to operate with higher speeds thus ensuring greater stability and working precision.

The STX meets the requirement for a high performance and productive machine reducing at the same time the operating costs.

Technical data

	stx flex 1250/30-2500	stx flex 1500/22-2500
Max. punching force (kN)	300	220
Y axis with Multitool /Monopunch (mm)
Y = 1250	1300 / 1250	-
Y = 1500	-	1550 / 1500
X axis (mm)	2500	2500
Automatic repositioning in X (mm)	up to 10000	up to 10000
Numerically control stroke depht (mm)	from 0.1 to 31	from 0.1 to 31
Hydraulic servomotor controlled system	standard	standard
Position accuracy (mm)	+/- 0.05	+/- 0.05
Precision in forming repeatability (mm)	+/- 0.1	+/- 0.1
Bidirectional Autoindex stations	3	3
Opening of clamps (mm)	11	11
Automatic positioning clamps	2	2
Max. hit rate (1/min):
Punching with 20 mm pitch	460	460
Nibbling with 1 mm pitch	1080	1080
Marking	2000	2000
Thickness range (mm)	0.6 - 6.5	0.6 - 6.5
Max. weight at reduced axis speed (kg)	180*	180*
USB port	6	6
Installed power (kW)	8.5	8.5
Average consumption (kW/h)	4.5	4.5
Approx. weight (kg)
X = 2500	8500	9000
Overall dimensions (mm)
X = 2500	4840 x 3630	4840 x 3880

* for sheets of over 50 kg weight combined brush and balls tables are required